Cuisinart DLC-2009CHB Instructions d'exploitation télécharger pdf (Page 18)

18

CLEANING AND

MAINTENANCE

Keep your food processor ready to use on

a kitchen counter. When not in use, leave it

unplugged.

Store the blade and discs as you would

sharp knives, out of the reach of children.

The disc and blade holders are optional

accessories which offer safe and conve-

nient storage.

All parts except the housing base are

dishwasher safe, and we recommend

washing them in the dishwasher on the top

rack. Due to intense water heat, washing

the work bowl and work bowl cover on the

bottom rack of your dishwasher may cause

damage over time. Insert the work bowl

upside down. Remember to unload the

dishwasher carefully wherever you place

sharp blades and discs.

To simplify cleaning, rinse the work bowl,

cover, pusher assembly and blade or disc

immediately after use so food won’t dry

on them. Openings at the bottom of the

large pusher provide drainage and make

cleaning easy. If food lodges in the pusher,

remove it by running water through it, or

use a bottle brush.

If you wash blade and discs by hand, do

it carefully. Avoid leaving them in soapy

water where they may disappear from

sight. To clean the metal blade,  ll the work

bowl with soapy water, hold the blade by

its plastic center and move it rapidly up

and down on the center shaft of the bowl.

Use of a spray attachment is also effective.

If necessary, use a brush.

The work bowl which is shatter resistant

and heat resistant. It should not be placed

in a microwave oven, as the aperture at the

front of the pusher houses the metal rod

that activates the motor.

Chopping certain foods may scratch or

cloud the work bowl. These foods include

ice, whole spices, coffee beans and oils

like wintergreen. If you like to prepare your

own spice blends, you may want to keep a

second bowl just for that purpose.

The housing base is made of a tough

plastic with high impact resistance. Its

smooth surface will look new for years.

Keep a sponge handy as you work, and

wipe spills from the base.

Four rubber feet on the underside keep

the base from moving on most work

surfaces when the machine is processing

heavy loads. If the feet leave spots on the

counter, spray them with a spot remover

and wipe with a damp sponge. If any trace

of the spot remains, repeat the procedure

and wipe the area with a damp sponge

and nonabrasive cleaning powder.

To clean the inside of the detachable stem,

slide the stem release button on the side

up as far as it will go and hold it there as

you run water through the stem.

IMPORTANT: Never store the blade or

discs on the motor shaft. The blade or disc

should not be placed on the shaft except

when the processor is about to be used.

MAINTENANCE: Any other servicing

should be performed by an authorized

service representative.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 72 73

Commentaires sur ces manuels

Pas de commentaire